No products
-
Benro T-660EX Tripod Photo Vidéo
This aluminum tripod offer an ideal compromise between lightness, strength and price.Aluminum4 sectionsH.max = 145cmWeight = 1.46kgH min = 46cm
39,99 € 44,99 €Reduced price!In StockClam 577 type for Video Plate 501PL
This accessory can be mounted on a tripod, rail, stabilizer or different mounting systems. For photography or video.
29,99 €This product will be available laterBenro BV6H Video Head
Load capacity of 6 kg75mm bowlFlat base by removing the bowlCounterweight in 8 stepsPanoramic slide and independent inclination in 4 stepsSliding plate type Manfrotto 501 / 504PL2x 3/8 "-16 Mounting thread for accessoriesAdjustable length handle
339,00 € 379,00 €Reduced price!In StockBenro MCA01 Motion Control for MoveOver12
Analog Motion Control UnitFor Use with MoveOver12 Camera SliderManual and Programmable A to B MovementAdjustable SpeedManual RampingCompact and PortableSoft Carrying Case
649,00 €In StockBenro MoveOver12 slider 90cm + MCA01 Motion Control
Benro MoveOver12 slider + MCA01 Motion ControlCarbon slider with a very smooth and silent bearing on the bearings. The slider comes in a luxurious, very spacious carry bag that can also be used for tripods and a video head. The slider can be used on tripods, light holders or on any surface. With the help of adjustable legs and a spirit level, the slider can
1 349,00 €In StockBenro MoveOver12 22mm Dual Carbon Rail 600mm Slider
Material: CarbonWeight: 4.30 kgMaximum load: 12 kgEffective length: 60 cmCarbon slider with a very smooth and silent bearing on the bearings. The slider comes in a luxurious, very spacious carry bag that can also be used for tripods and a video head. The slider can be used on tripods, light holders or on any surface. With the help of adjustable legs and a
749,00 € 799,00 €Reduced price!In StockBenro MoveOver12 60cm slider + MCA01 Motion Control
Benro MoveOver12 slider 60cm + MCA01 Motion ControlCarbon slider with a very smooth and silent bearing on the bearings. The slider comes in a luxurious, very spacious carry bag that can also be used for tripods and a video head. The slider can be used on tripods, light holders or on any surface. With the help of adjustable legs and a spirit level, the slider
1 049,00 €In StockMiops Holder Kit for Splash
The Miops arm for Splash is a magic arm with support for the Miops Splash. With this set, you can position the Miops Splash, for example, over a bowl of water in which drops of water fall. The arm can be locked in any position using the rotary knob on the side.The arm is equipped with male and female threads, so it can be mounted on almost any tripod.The
27,99 € 29,99 €Reduced price!This product will be available laterSmallRig Hand Grip with Start/Stop Sony
SmallRig Right Side Wooden Hand Grip with Record Start/Stop Remote Trigger for Sony Mirrorless Cameras Ref.2227Key features:1. Made of handcrafted rosewood, comfortable and attractive2. Applied in handheld shooting and shoulder mounting system3. Adjustable position of Arri rosette up and down within a certain range4. Control Sony mirrorless cameras
155,00 € 169,00 €Reduced price!Out of stockSmallRig Left Side Wooden Grip with Arri Rosette
SmallRig Left Side Wooden Grip with Arri Rosette 1891 is an extremely handcrafted rosewood grip, which is applied in shoulder mounting system or handheld shooting. You can adjust the position of Arri rosette up and down within a certain range according to your need. It is lightweight and exquisite, very comfortable to be held with the smooth surface.Key
129,00 € 139,00 €Reduced price!In StockSmallRig Right Side Wooden Grip with Arri Rosette
SmallRig Right Side Wooden Grip with Arri Rosette 1941 is an extremely handcrafted rosewood grip, which is applied in shoulder mounting system or handheld shooting. You can adjust the position of Arri rosette up and down within a certain range according to your need. It is lightweight and exquisite, very comfortable to be held with the smooth surface.Key
129,00 € 139,00 €Reduced price!In StockSmallRig Arri Standard Rosette Bolt-On Mount (M6 Thread)
SmallRig Arri Standard Rosette Bolt-On Mount (M6 Thread) 1939 is a multi-functional Arri Rosette (M6, 31.8mm diameter) mount. There are two 1/4’’-20 and four M2 threaded holes on this rosette mount. It can be attached to cage, rosette handle and other accessories. The stainless steel and aluminum alloy materials make the rosette mount more sturdy and
39,99 € 44,99 €Reduced price!In StockSmallRig NATO Clamp to Arri Rosette
The SmallRig NATO Gripper for Arri Rosette 2046 makes it possible to get the most out of its potential when shooting and offers many possibilities of extension according to your needs. It could be used in many scenarios and it is very convenient for the cameraman.Main characteristics:1. It is compatible with NATO rail
59,95 € 64,95 €Reduced price!On orderSachtler flowtech 75 MS Video Tripod
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. Head Mount Type 75 mm BowlLoad Capacity 44 lb / 20 kgMaximum Working Height 60.24" / 153 cmMinimum Working Height
1 099,00 € 1 379,00 €Reduced price!On order Usual delay 3-5 daysSachtler ACE XL Flowtech 75 Video Tripod
Sachtler Flowtech 75 MS Head Mount Type 75 mm BowlLoad Capacity 44 lb / 20 kgMaximum Working Height 60.24" / 153 cmMinimum Working Height 10.24" / 26 cmFolded Length 26.8" / 68 cmMaterials Aluminum, Carbon FiberWeight 6.4 lb / 2.9 kgLeg Lock Type Flip LockLeg Sections 3 Ace XL Head Camera Plate Features Sliding Balance
1 439,00 € 1 759,00 €Reduced price!On order Usual delay 3-5 daysBenro BV4H Video Head
Camera Plate Type QR13Camera Mounting Screw 1 x 1/4"-201 x 3/8"-16Base Mount 75 mm Half BallDrag Control Tilt: 3-Step Plus 0Drag Type FluidVertical Tilt +90° to -75°Panning Range 360°Load Capacity 8.8 lb / 4 kgCounter Balance Incremental 5-Step Plus 0Accessory Mounting 2 x 3/8"-16 Female Thread
239,00 € 289,00 €Reduced price!In StockBenro A1883FS2C Aero 2 Video Travel Angel Tripod Kit
Benro combines a detachable flat-base video head and a 3-section aluminum tripod. This makes it a tripod ideal for travel because it is compact enough to fit in many backpacks, trolley cases and carrying bags. The video head offers separate pan and tilt controls for smooth and precise camera movement. For added versatility, one of the legs of the tripod is
169,00 € 209,00 €Reduced price!This product will be available laterBenro A2883FS4 Aero 4 Video Travel Angel Tripod Kit
Benro combines a detachable flat-base video head and a 3-section aluminum tripod. This makes it a tripod ideal for travel because it is compact enough to fit in many backpacks, trolley cases and carrying bags. The video head offers separate pan and tilt controls for smooth and precise camera movement. For added versatility, one of the legs of the tripod is
229,00 € 279,00 €Reduced price!This product will be available laterReady Rig Gimbal Stabilizer (RRGS)
Use the Ready Rig GS Stabilizer to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen when doing handheld gimbal shots. The Ready Rig
2 699,00 €On orderBenro BV4 Twin Leg Aluminum Tripod Kit
The Benro BV4 video tripod kit includes a Benro BV4H head and a 2-stage / 3-section tripod with a removable mid-level spreader. The system can support cameras and accessories up to 4 kg and has a 75 mm ball / bowl connection. The head features a 6-step (1 to 5 plus 0) counterbalance system to compose the correct amount for your setup, as well as independent
449,00 € 499,00 €Reduced price!This product will be available laterBenro A373FBV4H Video Tripod Kit Aluminium
Able to hold a payload of up to 4kg, this tripod is a great choice for lightweight kits, especially with numerous video-specific features. The BV4 head features side controls for adjusting the 6-step counterbalance as well as the independent 4-step pan and tilt drag. The 2-stage tripod legs feature flip legs locks for fast adjustments and have a 75mm bowl on
439,00 € 479,00 €Reduced price!This product will be available laterGrip Gear Movie Maker Directors Set
Capture smooth, automated shooting with your small camera or smartphone using the Grip Gear Movie Maker set of directors.
169,00 €In StockGrip Gear Movie Maker 2 Slider & 360° Panorama System
The Grip Gear Movie Maker 2 is a motorized rail system, panorama system and 360-degree time-lapse for small cameras and smartphones weighing up to 750kg. The system includes two 30cm tracks and a motorized slider carriage that can be used for 360 ° panoramic shooting, Movie Maker 2 allows you to capture different types of smooth, motion-controlled shots.
145,00 € 149,00 €Reduced price!Delay approx. 3 to 6 weeksEdelkrone Sliderone v2 Motorised Slider
The extremely portable, rugged motorized Slider with vertical operating capability + wireless connectivity with motorized edelkrone heads.
549,00 €On order - No Return or CancelEdelkrone Sliderone Pro v2 Motorised Slider
The extremely portable, rugged motorized Slider with vertical operating capability + wireless connectivity with motorized edelkrone heads.
969,00 €On order - No Return or CancelSmallRig Quick Release Safety Rail(46mm) 1409
The quick release safety rail is part of our QR-handles. The spring pin at each end of the rail prevents accidental detachment of accessories. Compatible with our SlideMount, w / Epic Red / Scarlet, Black Magic Camera and other third party accessories.Package includes:1 x 46 Safety rail1 x hex key2 x 1 / 4''visNet weight: 38Material (s): aluminum alloy
14,95 €In StockSmallRig Quick Release Clamp and Plate ( Arca-type Compatible) 2144
SmallRig Quick Release Clamp and Plate ( Arca-type Compatible) 2144Key Features:1.Arca-type compatible2.Multiple 1/4’’-20, 3/8’’-16 threaded holes and thorough mounting holes3.Lever-type base for quick releaseSmallRig Quick Release Clamp and Plate (Arca-type Compatible) 2144 includes an Arca-type clamp and a plate. Tightness of the clamp can be adjusted by
74,00 € 79,00 €Reduced price!In StockSmallRig Aluminum Arri Locating Side Handle HSS2426
Fits camera cages with arri locating holes on the side or with the optional adapter Smallrig 2171 Built-in Allen wrench allows to change the direction of the handle and adjust the height. Mounting holes & cold shoe on top of the handle for accessory attachment. Aluminum body with anti-slip silicone gel coverings provide a comfortable and lightweight
75,00 € 79,00 €Reduced price!In StockSmallRig Mini Plate with an Arri Locating Hole 2171
Compatible with Arri locating products to prevent twisting of accessories; Mounting to two 1/4’’-20 threaded holes spaced standard 18mm; Low-profile
13,95 € 14,95 €Reduced price!In StockSmallRig Swivel and Tilt Monitor Mount with Cold Shoe BSE2346
SmallRig BSE2346 Swivel and Tilt Monitor StandMain characteristics:1. Supports a 5 ”and 7” monitor up to 1.2 kg.2. Rotate 360 ° and tilt it 140 ° with free stop in any position.3. Includes holes on the thumbscrews for the hex key.4. Rubber stamp on top to prevent scratches.5. CNC machined aluminum construction, robust and durable.
49,99 €In StockSmallRig Rotating Nato Handle HTN2362
SmallRig Roto Nato Clamp Handle HTN2362Main characteristics: NATO quick release handle Allows you to rotate 360 degrees for the top handle or the side handle integrates with the hex key 1/4 "-20 & 3/8" -16 & Arri 3/8 Accessory holes Front hot shoe includes button to prevent unwanted slipping
109,95 € 129,95 €Reduced price!In StockSmallRig Swivel and Tilt Monitor Mount BSE2294
SmallRig BSE2346 Swivel and Tilt Monitor StandMain characteristics:1. Supports a 5 ”and 7” monitor up to 1.2 kg.2. Rotate 360 ° and tilt it 140 ° with free stop in any position.3. Includes holes on the thumbscrews for the hex key.4. Rubber stamp on top to prevent scratches.5. CNC machined aluminum construction, robust and durable.
49,99 €In StockSmallRig HDMI & USB-C Cable Clamp for BMPCC 4K & 6K 2246B
SmallRig HDMI and USB-C cable clamp for BMPCC 4K and 6K cages (new version) 2246BMain characteristics:1. Compatible with SmallRig 2203B, CVB2254B and CVB2255B (new version).2. Attach the HDMI and USB-C cables.3. Attaches to the cage with 2 1/4 ”-20 screws.4. Durable aluminum construction.
33,99 €In StockSmallRig Top Handle (Rubber) 1446
SmallRig Top Handle (Rubber) 1446SmallRig Top Handle 1446 could be mounted to the top plate of the cage via two 1/4’’ screws. It provides lots of convenience when performing handheld shooting. The good-quality rubber handle is very good looking and the special design increases its friction during handheld shooting. It is equipped with a cold shoe on the top
29,95 €In StockRingLight Matte Box M1
Protection ajustable contre les rayons lumineux Coupe flux ajustablesEvite le flare et autres réflexions indésirablesDeux supports pour filtre inépendantsHauteur ajustableCompatibilité standard avec toutes tiges de 15mm avec un écart de 6cm
39,99 € 44,99 €Reduced price!In StockRingLight Matte Box M2
Caractéristiques: • 240mm x 150mm • Aluminium usiné • Mécanisme escamotable pour des changements rapides de lentilles • Compatible avec les objectifs grand angle • hauteur standard de l'industrie avec ajustement +/- 10mm • 2 plateaux de filtre à double usage avec support des deux 4x4 et 4x5.6 "tailles de filtres (rotation à 360 degrés) • 4 adaptateur pour
279,99 € 299,99 €Reduced price!Order delay 1 monthRingLight Rig Video RL-02 Set (Rig RL-02 + F1 + M1)
DSLR Rig RL-02 Support dia: 15mm Longueur de rail: 19cm Filetage: 1/4 Follow Focus F1 Système de blocage réglable Se monte sur le support de tige de 15mm Compatible avec tous les appareils photo reflex numériques, caméras vidéo Compatible avec des standards de l'industrie: tiges 15 mm Engrenage sans glissement avec mouvement
299,00 € 329,00 €Reduced price!Order delay 1 monthRingLight Rig Video RL-03 Pro Set (Rig RL-03+F4+M2+...)
Le RL03 set représente le système de plus évolué de la marque. Léger et complet, il vous permettrait de fortement améliorer vos prises de vue à l'épaule mais aussi sur trépied. DSLR Rig RL-03 Épaulière: aluminium avec rembourrage en mousse Poignée: aluminium revêtu de néoprène Rail Diamètre: 15 mm Rail Distance: 60 mm Longueur des rails:
699,00 € 799,00 €Reduced price!On orderRingLight Follow Focus F0
Follow Focus pour VDSLR et caméras Permet une mise au point fluide et préciseZone de marquage pour les points de focus Compatible gauche ou droiteL'engrenage peut être placé à gauche et à droiteMontage sur support de 15mmAjustable en hauteur et en largeur
99,99 € 109,99 €Reduced price!Order delay 1 monthRingLight Follow Focus F1
Follow Focus pour VDSLR et caméras Permet une mise au point fluide et préciseZone de marquage pour les points de focusL'engrenage peut être placé à gauche et à droiteMontage sur support de 15mm
144,99 € 159,99 €Reduced price!Order delay 1 monthRingLight Follow Focus F2
Follow Focus pour VDSLR et caméras. Plateau en L pour montage direct (sans autre support). Permet une mise au point fluide et préciseZone de marquage pour les points de focusL'engrenage peut être placé à gauche et à droite
164,99 € 179,99 €Reduced price!Order delay 1 monthRingLight F4 for rods / hard stopers (with Lens Gear Belt)
Follow Focus pour VDSLR et caméras Permet une mise au point fluide et préciseCrans d'arrêts A/BZone de marquage pour les points de focusL'engrenage peut être placé à gauche et à droiteMontage rapide sur support de 15mmDiamètre de optiques compatibles (taille de la bague) de 52 à 86mm
244,99 € 269,99 €Reduced price!In StockRingLight Lens Gear Belt / Courroie pour follow focus
RingLight Lens Gear Belt / Courroie pour follow focus Ajustable en longueur Diamètre de optiques compatibles (taille de la bague) de 52 à 86mm
11,99 € 14,99 €Reduced price!In StockRingLight Car Rig 3 / Support 3 ventouses
Support 3 ventouses Ce système est la solution idéale pour un tournage en voiture, en bateau ou tout autre objet mobile avec une surface lisse. Très grande stabilité grâce aux 3 ventouses. - L'attachement sur des surfaces lisses - Equipé de 3 ventouses pour une stabilité accrue - 1/4 "vis pour fixer votre appareil photo
104,99 € 119,99 €Reduced price!Order delay 1 monthRingLight Chargeur de batterie pour Gyro Stabilizer 2 Axis II
RingLight Chargeur de batterie pour Gyro Stabilizer 2 Axis II
39,99 €In StockRingLight Batterie pour Gyro Stabilizer 2 Axis II
RingLight Batterie pour Gyro Stabilizer 2 Axis II
49,99 €Order delay 1 monthRingLight Carbon Jib Arm with Bag / Grue photo
Grue photo. Matériel: Fibre de carboneMax rotation: 120cmMini rotation: 70cmLongueur max: 1.82cmMax Tube: 30mmCharge max: 5 kgPoids: 1,8 kgTaille fermé: 80cm Kit incluant:Section avantSection arrièreSac de transportSac pour poids Non inclus: trépied, boîtier, objectif
224,99 € 239,99 €Reduced price!In StockRingLight Rig Video RL-02
DSLR Rig RL-02 Support dia: 15mm Longueur de rail: 19cm Filetage: 1/4
134,00 € 149,00 €Reduced price!Order delay 1 monthRingLight Stand Gyro Stabilizer
RingLight Stand Gyro Stabilizer Support permettant de déposer le système Gyro Stabilizer lorsqu'il n'est pas utilisé ou pendant l'équilibrage. Léger et facilement démontable.
54,99 € 59,99 €Reduced price!In StockBenro S7 Pro Video Head
Video The Benro S7 Pro Video Head with Flat Base (3/8"-16 Connection) will attach directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. It can also be adapted to 75mm bowl type legs and hi-hats using an adapter, such as the Benro BL75, that is sold separately. The S6 is a two-way, pan/tilt head
214,00 € 239,00 €Reduced price!In StockRingLight Zoom Lever Gear Ring (Plastic)
RingLight Zoom Lever Gear Ring (Plastic) Ajustable en longueur Circonférence des optiques compatibles de env. 20 à 30mm
9,99 € 11,99 €Reduced price!In StockBenro C48FDS4 Monopode Carbone kit
Ce qui comprend un monopode C48F, une tête vidéo S4 et une système de mini trépied VT2. Les monopodes de série A sont fabriqués dans un alliage d'aluminium de haute qualité assurant une rigidité, une longévité et une fiabilité ainsi qu'une conception élégante et fonctionnelle. Carbone 4-sec H.min=65cm H.max=174cm Poids=1,77kg Capacite=4kg Livré avec
289,00 €Out of stockGenesis SK-MHF03 Rig
Le SK-MHF03 est une crosse d’épaule la plus avancée de la marque Genesis qui facilitera grandement vos prises de vues lors de vos tournages et vous permettra d'obtenir des effets spectaculaires tout en offrant une stabilité exemplaire. Le support est muni d’un système de mise au point éléctronique follow-focus. Il est compatible avec la plupart
499,00 € 599,00 €Reduced price!This product will be available laterGenesis Gear YAPCO – stabilisateur pour appareils photo/vidéo
Yapco Com Stabilizer est un stabilisateur intertiel réduisant les vibrations de la caméra provoquées par les mouvements de son opérateur. Facile à utiliser et à transporter, il a été conçu pour des professionnels et pour des débutants passionnés. Grâce à un repositionnement du centre de gravité précis et à de nombreuses options de configuration, il peut être
219,00 € 249,00 €Reduced price!This product will be available laterBenro Hi-Hat HH100AV Video Tripod Aluminium
Product: HH100AV sections: 2 Height: 28 cm Material: Aluminum Closure: twist Weight: 1.6 kg peak load: 100 kg minimum height: 7.5cm minimum height: 7.5cm Bowl size: 100 Retracted length: 23 cm Base mount diameter: 100 mm The Benro 100mm Hi-Hat is a versatile video production tool that allowsfor unique camera placement and comes in a portable package. This
269,00 € 299,00 €Reduced price!In StockBenro Hi-Hat HH75AV Video Tripod Aluminium
Product: HH75AV Closure: twist Sections: 2 Height: 28 cm Material: Aluminum Weight: 1.3 kg Peak load: 75kg Minimum height: 8 cm Minimum height: 8 cm Bowl size: 75 Retracted length: 23 cm Base mount diameter: 75 mm The Benro 75mm Hi-Hat is a versatile video production tool that allowsfor unique camera placement and comes in a portable package. This
219,00 € 239,00 €Reduced price!In StockBenro A2573FS6 Video Tripod Kit Aluminium
AluminumMaximum load 6kgMaximum height (leg angle 24 °) with extended column 178cmMaximum height (leg angle 24 °) with retracted column 160cmMinimum height 43cmMaximum height 178cmFolded length 80.5cmLock Flip LockIndependent legs Yes - with 3 stopsTilt range +90 / -75 (fixed fluid cartridge scale)Quick Release Slide (QR) Slide Video (QR6)Weight 3.15kg
309,00 €This product will be available laterBenro Kit tripod A373FBS7 with Video head S7
Benro Kit tripod A373FB with Video head S7 Maximum Load 15.4 lb (7 kg)Max Height (24° Leg Angle)w/Column Extended63.2 in (160.5 cm)Folded Length 30.3 in (77 cm)Number of Leg Sections 3Leg Lock Type Flip LockIndependent Leg Spread Yes - with 3 stopsTilt Range+90 / -75 (Stepped 0-3 FluidCartridge Balance)Drag Control LockPanning Range 360°Separate Panning
429,00 € 469,00 €Reduced price!In StockBenro Kit Trépied Video A573TBS7
Trépied vidéo avec tête fluide. Niveau à bulle illuminé, rotation panoramique à 360 et d'inclinaison de -75 à + 90 °. Kit constitué de : Trépied Benro A573TB Tête S7 + Plateau Sac de transport CARACTÉRISTIQUES - Hauteur maximale: 157.5 cm.- Hauteur minimale: 83 cm.- Trépied fermé: 84 cm.- Poids: 4.47 kg.- Poids maximum supporté: 7 kg.-
499,00 €Out of stockBenro A674TMH10 Trépied Vidéo
A savoir: - Trépied aluminium trois sections - Entretoise à écartement et angle réglable - Tête fluide à bain d'huile avec bras ajustable (de 38 à 58cm) - Contrebalancement réglable sur 5 niveaux - Frein ajustement sur les 2 axes - Plateau rapide 78x55mm avec vis de fixation 1/4" et 3/8" (livré) - Bol de 100 mm - Niveau á bulle intégré sur la
1 049,00 €Out of stockVaravon 75mm Video Half Ball Adapter
Varavon 75mm Video Half Ball Adapter
69,00 € 79,00 €Reduced price!In StockBenro A48FDS4 Monopode Aluminium kit
Ce qui comprend un monopode A48F, une tête vidéo S4 et une système de mini trépied VT2. Les monopodes de série A sont fabriqués dans un alliage d'aluminium de haute qualité assurant une rigidité, une longévité et une fiabilité ainsi qu'une conception élégante et fonctionnelle. Aluminium 4-sec H.min=65cm H.max=174cm Poids=1,95g Capacite=4kg Livré
189,00 € 209,00 €Reduced price!Out of stockGenesis SteadyCam PRO Carbon MK II
Genesis SteadyCam Pro Carbon is a professional, manual image stabilizer. It is intended for film cameras and DSLRs, while its carrying capacity is 3 kg. It has been made of aluminum alloy and carbon fiber. SteadyCam Pro Carbon features a platform with the quick-release and an articulated handle with 3-axes. It ensures smooth frames even when you run or walk
189,00 € 219,00 €Reduced price!This product will be available laterGlidecam iGLIDE II
Dynamic Camera Balance Platform (Camera Mounting Platform)Adjustable convergence, precision, three-axis GimbalNo-tools Telescoping Center PostAdjustable, inertial-control Base PlatformFoam padded Handle GripPrecision Bearings at all vital pointsMade with precision AluminumAnodized Studio BlackLaser etched LabelingAllows unrestricted Booming and 360 degree
279,00 € 299,00 €Reduced price!On orderGLIDECAM XR-PRO
Dynamic Camera Balance Platform (Camera Mounting Platform)Adjustable convergence, precision, three-axis GimbalNo-tools Telescoping Center PostAdjustable, inertial-control Base PlatformFoam padded Handle GripPrecision Bearings at all vital pointsMade with precision AluminumAnodized Studio BlackLaser etched LabelingAllows unrestricted Booming and 360 degree
319,00 € 339,00 €Reduced price!This product will be available laterBenro S4H Hybrid Flat Base Head
Cette rotule s'adapte sur tous les trépieds équipés d'une vis 3/8'. Elle offre une solution parfaite à l'usage de reflex vidéo et caméras amateurs. Cette tête convient également parfaitement à l'observation. Avec son nouveau système type Arca, Benro augmente considérablement la polyvalence de son système. Livré avec son plateau Arca
149,00 €This product will be available laterBenro S2H Hybrid Flat Base Head
Cette rotule s'adapte sur tous les trépieds équipés d'une vis 3/8'. Elle offre une solution parfaite à l'usage de reflex vidéo et caméras amateurs. Cette tête convient également parfaitement à l'observation. Avec son nouveau système type Arca, Benro augmente considérablement la polyvalence de son système.
79,00 €In StockBenro PP1 mini tripod photo and phone
Height: 17.6 cmWeight: 0.16 kg Max load: 1.5kg Pas de vis 1/4" Mini trépied avec rotule orientable pour mettant de position un appareil photo, une caméra, un micro, une torche, etc... ou un smartphone. Livré avec un support pour smartphone ajustable de 48 à 100mm
19,95 € 24,95 €Reduced price!In StockKessler HD Angle Plate
The HD Angle Plate is the newest addition to Kessler’s mounting & grip accessories. It fills a gap for heavy duty leveling of up to 50 lbs., ideal for use with Kessler motion control heads. Choose between 2 options: One with swivel that features 360-degree rotation and one without swivel that has a fixed orientation.
499,00 €In StockKessler Kwik Utility Plate Arca Swiss
UTILITY Designed for mounting Rev Head, High Hats and sliders, but also works great for other accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.
79,99 €On order - Delay approx. 3-4 daysBig Lens © Copyright 2006-
