The 10-layer woven carbon makes the solid Tripod LQ-284C while with the central pillar it remains lightweight with only 1.32 kg. In addition, the 3rd generation of carbon weaving model gives a robust and remarkable appearance to the tripod. On the side of the tripod platform you will find a 3/8 inch and ¼-inch screw pitch to deploy the tripod with the magic arm and other accessories. Like all Leofoto tripods, Leofoto LQ-284C is no exception and comes with 10 years warranty.

Central pillar included

The Leofoto Tripod Mr. Q has a removable central pillar with a diameter of 50 mm. On this tripod tray, you mount the LH-36 patella. It is also possible to remove the tray and place the central pillar instead. The placement of the central pillar only lasts a few seconds and you do not need tools to do it. You can set the height of the center column with the silver-colored butterfly nut with rubber non-slip bands. The central pillar (⌀ 25mm) has a length of 31cm and provides a great maximum height. This makes it possible to use the tripod very extensively in photography in studio, in landscape photography and even in macrophotography.

Leofoto Tripod Properties

You can adjust the feet in height with the intuitive TwistLock system. Thanks to the latter, you change the foot section of the tripod in a trick tomorrow. The rotating rubber handles also make it possible to control the feet with gloves. It is also possible to define the inclination angle of carbon feet from the tripod according to 3 inclinations: 23 °, 55 ° and 85 °. With the most important tilt angle, the tripod feet are practically flat on the floor. You can reach a working height of 16 cm. In addition, the tripod has rubber feet that prevent the feet from slipping on smooth support. You can replace feet with spikes. The spikes offer more stability on a furniture floor. With this fork carbon tripod, a water-repellent asymmetric bag provides more comfort during transport.

LH-36 ball joint with QP-70N connection plate

The professional LH-36 ball can rotate at 360 ° C, portrait position in the landscape position and has a 3/8 '' universal tripod screw on which you can attach virtually any camera. The friction is adjustable via a wheel, which offers a very precise adjustment possibility. The patella has a diameter of 36 mm and a panoramic base of 52 mm. The height is 84 mm. This patelet comes with a QP-70N connection plate and is ARCA Swiss compatible. It can carry 18 kg and weighs 410 grams.

ARCA-SWISS compatible tripod plate

Thanks to the QP-70N Arca Swiss Universal Tripod Plate you securely attach the camera to the Leofoto - LH-36 rod. You unscrew the clamping collar, slide the connection plate with a length of 70 mm into the support and screw the clamp. It goes without saying that this connection plate can be changed for another ARCA Swiss universal connection plate. The camera can also be attached to this ball with a Leofoto plate.

Weight of the head (g) 410
Number of sections 4
Tilt angles 3
Head included YES
LH-36 head
Closed dimension (mm) 540
Bulle level yes
ARCA YES COMPATIBLE
Maximum height (mm) 1580
Maximum height without central column (mm) 1290
Minimum height (mm) 160
QP-70 Quick Shelf
Removable central column YES
Tripod weight (g) 1320